TES Skyrim 0.221

[ENBSeries]

The Elder Scrolls Skyrim (TES Skyrim, Скурим Свитки)

Graphic mod ENBSeries / patch ENBoost 0.221

Optimized a little subsurface scattering, added quality options of it (require "save" and then "apply" button to be pressed in editor). Added separate parameters of vanilla subsurface scattering control for eyes only. Removed depth of field fix which added in previous version and which not working for some users.

[Yersinia79]

Will have a look now ^^

[cuteqq]

DepthOfField Still does not work

[ENBSeries]

cuteqq
Thanks for response. I compared your configs and found what the problem is, it's bFloatPointRenderTarget=0 parameter, must be 1. b30GrassVS=0 isn't good also, but it not affect dof.

[cuteqq]

Boris

Thank you very much

[Yersinia79]

Low Power ------------------------- High power :>

Same Multiplier
I need to find some value between those I guess, looks good either way^^

[Oyama]

The separated section for [EYES] is fantastic !

[CruNcher]

@Boris
so they have a seperate eye shader ?

I see a strange effect with Reflections + Temporall AA enabling Temporal AA destroys part of the reflective specular surface texture area ?

Boris are reflections dependent on the Main Resolution does the quality scale with it ?

I try to get her face reflecting in the armor but the quality is very weak

I have texture and Sizescale on 1.00 and i reduced the noise with the denoiser and blured it slightly too but the quality of the reflection is still to low to become perceptible

[Winterlove]

OK, here's my findings for 0.221 (and 0.220). Mostly OK - certainly I've not seen anything horrific on anyone's skin textures.

However, there seems to be something amiss with snow textures. They seem to flicker between two brightness levels depending on angle of view. Here's an example, taken in the Fort Dunstad compound on an in-game sunny morning:

Too bright:


What it should be:


All I did to flip between these two was change my angle of view a little. Those screens were taken with 0.221, but I've also seen similar with 0.220 (only the bright version seemed permanent). 0.218 does not do this, I haven't tried 0.219.

Another oddity with both 0.221 and 0.220. Occasionally the game seems to freeze for a short while (of the order of 5 to 10 seconds) when exiting the UI. A typical example was when I waited in-game - you select your interval, press OK, game appears to freeze, then comes back (having correctly waited). I determined it seemed to be related to leaving the UI when I saw it happen with another UI dialogue, when it appeared to freeze at the point you wanted to confirm exit from what I was doing (alchemy, I think).

[ENBSeries]

CruNcher
Eye parameters work only for vanilla eyes or for those, which have same shader setup as vanilla eyes.
TAA affect everything, it's full screen effect like supersampling, not multisampling.

Winterlove
Saw this bug near riverwood on the roads when visualized debug mode, but it dissapeared after i started pc again and never appeared any more, so i don't know how to get it and only can swear. Of course if you have modified meshes of snow which use sss, it's not my business.
Any complains of the GUI related issues unacceptable, there is no changes in it and it's absolutely separated part of the mod.