TES Skyrim 0.308

Forum rules
new topics are not allowed in this subsection, only replies.
  • Author
  • Message
Offline
User avatar
*blah-blah-blah maniac*
Posts: 3123
Joined: 27 Jan 2012, 13:42

Re: TES Skyrim 0.308

Just tested quickly with Windows 10 Creator's Update, Game Mode + Geforce Experience enabled and everything seemed to work as they should.

Hopefully some people that have been experiencing issues can test as well.

Offline
User avatar
*blah-blah-blah maniac*
Posts: 17427
Joined: 27 Dec 2011, 08:53
Location: Rather not to say

Re: TES Skyrim 0.308

mindflux
Older version (from downloads on site) do not work with these applications for you?

Folks, check previous page, there is a test
_________________
i9-9900k, 64Gb RAM, RTX 3060 12Gb, Win7

Offline
*master*
Posts: 194
Joined: 12 Feb 2014, 17:05

Re: TES Skyrim 0.308

Tested with
Windows 10 x64, WITHOUT Creators Update
EVGA GTX 970

EVGA Precision X (default install settings)
v6.1.6: Both d3d9 Versions work fine
v6.0.9: Both d3d9 Versions Skyrim Crash at startup

but i've read that 6.0.9 had issues with other software too. (then again, which version does'nt...)
If skysan is sure that it worked before with 6.0.9, then combined with my findings, that would mean it is more likely the issue in the d3d9.dll is still present?
_________________
Win10x64 (fall creators update) | Intel i5-2500k | Nvidia GTX 970 | 16GB

Offline
User avatar
*blah-blah-blah maniac*
Posts: 3123
Joined: 27 Jan 2012, 13:42

Re: TES Skyrim 0.308

ENBSeries
Yeah at some point when Windows 10 was launched, not sure whether something changed with Creator's Update. I'll need to test older versions.

Offline
Posts: 1
Joined: 15 Jun 2017, 02:38

Re: TES Skyrim 0.308

thank very much

Offline
Posts: 2
Joined: 03 Sep 2013, 03:41

Re: TES Skyrim 0.308

Ahem, what's the current state?

Still get the tesv.exe application error 0xc000001d, Event Manager says that someting could not been loaded, but it only shows two quotes instead of what can't be loaded.

Removing the d3d9.dll from current ENB let Skyrim run, so this is the culprit.

I don't run PrecisionX or something like that.

I searched for hours to get a solution but nothing helped:
-installed DirectX Jun2010
-injector version of ENB
-remove compatibility mode/ runs as Admin from tesv.exe, skse_loader.exe, skyrimlauncher.exe
-disable game mode in Windows 10

For unknown reason some people don't have any problem at all but others say the Creators Update has broken ENB.

Any idea? :cry:




My System:
Windows 10 Creators Update x64
GTX 980Ti
32GB RAM
Core i5 7600K

Offline
User avatar
*blah-blah-blah maniac*
Posts: 17427
Joined: 27 Dec 2011, 08:53
Location: Rather not to say

Re: TES Skyrim 0.308

Sorry, i have no intention to waste money on this OS just for testing wtf they done wrong.
_________________
i9-9900k, 64Gb RAM, RTX 3060 12Gb, Win7

Offline
User avatar
*blah-blah-blah maniac*
Posts: 572
Joined: 23 Aug 2013, 21:59
Location: United States

Re: TES Skyrim 0.308

archer wrote:Ahem, what's the current state?

Still get the tesv.exe application error 0xc000001d, Event Manager says that someting could not been loaded, but it only shows two quotes instead of what can't be loaded.

Removing the d3d9.dll from current ENB let Skyrim run, so this is the culprit.

I don't run PrecisionX or something like that.

I searched for hours to get a solution but nothing helped:
-installed DirectX Jun2010
-injector version of ENB
-remove compatibility mode/ runs as Admin from tesv.exe, skse_loader.exe, skyrimlauncher.exe
-disable game mode in Windows 10

For unknown reason some people don't have any problem at all but others say the Creators Update has broken ENB.

Any idea? :cry:




My System:
Windows 10 Creators Update x64
GTX 980Ti
32GB RAM
Core i5 7600K
Are you trying to run a preset that has SweetFX hooked in and have you tried the base files downloaded from here only? I ran into the same issue saying something about dxgi could not be found in system32/d3d11.dll or whatever. The issue is that SFX doesn't work in Windows 10 if that's the case. If it's not that, then I dunno... I'm running Windows 10 Creators Update x64 as well and have no issues of the sort. I have one issue but I'm pretty sure it's the preset I'm using or something in my mods that I can work around.
_________________
AMD Ryzen 5 3600 6C/12T @4.4GHz // 16GB G.Skill Ripjaws V DDR4 3600MHz // ASRock AMD Radeon 5700XT Taichi X 8GB OC+// Samsung 850 Evo 256GB and 500GB SSD // 4 TB Seagate Barracuda // Windows 10 x64
Lumen ENB
My Flickr

Offline
User avatar
*blah-blah-blah maniac*
Posts: 572
Joined: 23 Aug 2013, 21:59
Location: United States

Re: TES Skyrim 0.308

ibbanez wrote:I use Precision X as well, what you need to do is go into the folder and rename the PrecisionXServer.exe and PrecisionXServerHooks.dll to add .bak to each of them.
Is there any particular reason you guys use PrecisionX? Wouldn't switching to Afterburner fix the problem more easily?
_________________
AMD Ryzen 5 3600 6C/12T @4.4GHz // 16GB G.Skill Ripjaws V DDR4 3600MHz // ASRock AMD Radeon 5700XT Taichi X 8GB OC+// Samsung 850 Evo 256GB and 500GB SSD // 4 TB Seagate Barracuda // Windows 10 x64
Lumen ENB
My Flickr

Offline
*blah-blah-blah maniac*
Posts: 565
Joined: 05 Apr 2014, 10:29
Location: Taiwan

Re: TES Skyrim 0.308

Hay boris, can you use the water level in current cell:

Code: Select all

	float GetWaterLevel(TESObjectCELL * thisCell)
	{
		if (!thisCell)
			return LONG_MIN;

		return thisCell->waterLevel;
	}
from skse

to achieve reflection on water body?
_________________
Intel Xeon L5639 6C12T @3.96GHz | Gigabyte ga-x58a-ud3r | MSI GTX680 4G | 48G RAM | Intel 760p Nvme w clover bootloader
Flickr
YouTube
Post Reply