TES Skyrim 0.303 ENBoost

[ENBSeries]

You may also try assign affinity mask of game process to physical cores only, if cpu have hyper-threading.

[Madpaddy]

Arh ok ill turn HT off and give that a go cheers.

[Viscerous]

Well, I tried a very script heavy save and got to a point where any fast travel would have a 100% crash ratio. Set DataSyncMode from 0 to 1, with PriorityMode still on 0 and it loaded fine. So it works! You knew that already otherwise you wouldn't have released it, but I'm not sure what else to report in the thread. I'll do some more testing on the script heavy save, but it's nice something is being done to increase stability.

[FiftyTifty]

Played for an hour or two with PriorityMode=1 & DataSync=0. Didn't notice any difference. Going to play with PriorityMode=2 later.

[ENBSeries]

Is it just me with slow downclocked videocard or Skyrim really have much higher performance with certain fov setting in some places? For example interior which i tested with 71 fov vs 70 have about 20% higher fps, exteriors kinda too.

[FiftyTifty]

Is it just me with slow downclocked videocard or Skyrim really have much higher performance with certain fov setting in some places? For example interior which i tested with 71 fov vs 70 have about 20% higher fps, exteriors kinda too.

I only fuddled with the FoV back when I had a 6670 ddr3, but I found that going down from 70 to 65 (Morrowind's FoV) kept me from dipping below 40fps (didn't have an ENB back then, no graphical mods either). With 70, I'd often drop into the high teens.

Haven't been bothered to change the FoV. I'll give it a try myself later.

[Dinkledorf]

Minimal testing so far and only with the default settings for Threads. Loads work great so far but I did have my game hang on me once requiring Task Manager to stop the process.

[Viscerous]

Is it just me with slow downclocked videocard or Skyrim really have much higher performance with certain fov setting in some places? For example interior which i tested with 71 fov vs 70 have about 20% higher fps, exteriors kinda too.

I always thought it had to do with the occlusion culling but I've been using really big FoV changes like to 25 or something for screenshots. It sounds a bit strange you'd get 20% higher FPS going from 71 to 70.

[Neuba]

I can confirm that. With different fov, performance differences may be quite noticeable.

in regards of SLI: I use two gtx 980 with 4gb vram each. in the comments section, people said, that the skyrim engine is not using all the vram (what I can confirm here too, more stuttering (due to vram), than with single card). Can anyone suggest any SLI profiles that are working nicely?

And regarding Windows 10: MS does not offer a way to get windows 7, if I previously used 8.1, then upgraded to 10, right?

This whole windows & graphics driver things are so fucked up. :c

[TwoArmedMan15]

Boris, I was wondering if the SKSE plugin "One Tweak" would conflict with the new ENBoost fixes. (Here is a link to the mod I am talking about: http://www.nexusmods.com/skyrim/mods/40706/? )

I ask because OneTweak has a feature that supposedly manages the process priority of Skyrim. Would this conflict with the PriorityMode option in ENBoost v6? What exactly does the PriorityMode control?

Thanks.